服务流程 Process Service
1、电话/Email咨询
counseling before testing with telephone/Email
2、准备样品
需要检测的客户请在送检样品之前应先明确样品的检测要求，在每个相应样品上注明清楚该样品的名称，最好能分袋包装，并贴上标签。对于成品，请注明哪些材料是相同材质。
每个检测项目的样品检测需要量分别：Sample amount for different test parameters:
1、对每个单检测项目样品需量均为5 g左右，如同一样品需要检测多个项目，则需累加重量。
2、对可溶性重金属和pH值检测：检测样品需量为10 g左右。
3、对镍释放检测：需要提供3个以上的金属物件。
4、如需要进行原料检测，请与精锐检测公司技术人员进一步确认具体事宜。
Preparation sample
Please make sure your test requirements before sending tested samples. Please give an ID for each sample for individual material etc.
1、5g is needed for individual test. Cumulative amount needed for more than one parameter
2、Soluble heavy metals plus pH value tests: 10g
3、Ni release quick check: more than 3 metal articles
4、Please confirm with our customer service specialists when your raw material testing needed.
3、填写检测申请单
Fill in the Application Form
4、送样到实验室
地址：广东省东莞市厚街镇河田大道77号华丰大厦3楼 邮编：523945
Address: 3/F., Hua feng Building, No.77, Hetian Avenue, Houjie Town, Dongguan, Guangdong, China P.C. 523945
收件/ Attention: ：陈振伟 / King Chan
联系电话/ Telephone:：（+86）13602386325
邮箱/Email: Kngchan168@126.com
5、报价及确认
收到样品后本公司会与您联系，确认样品、检测项目及可能的检测周期以及报价。请在收到本公司的报价单后尽快回签确认，汇款并将汇款凭证回传到我司。
confirm quotation
Our Business Department will contact with you as soon as receiving your samples and confirm the sample amount, test requirements, possible turn around time as well as the quotations. Please confirm the test requirements and the quotation with signature or company seal as soon as possible so as to follow the next testing.
6、测试及报告
检测收到汇款凭证后，按照申请，安排相应的测试；如有需要复测，可能要求增加样品的送样量。测试完成后我们会把测试报告发送到您的邮箱，您也可以选择自取或快递给您。
Testing and Repoting
Our technicians will analyse the samples with standard methods or client specified methods. PTS Testing Service Co., Ltd. prefers to send your report with email, or you may select to send the report by express or pick-up the report by yourself.
counseling before testing with telephone/Email
2、准备样品
需要检测的客户请在送检样品之前应先明确样品的检测要求，在每个相应样品上注明清楚该样品的名称，最好能分袋包装，并贴上标签。对于成品，请注明哪些材料是相同材质。
每个检测项目的样品检测需要量分别：Sample amount for different test parameters:
1、对每个单检测项目样品需量均为5 g左右，如同一样品需要检测多个项目，则需累加重量。
2、对可溶性重金属和pH值检测：检测样品需量为10 g左右。
3、对镍释放检测：需要提供3个以上的金属物件。
4、如需要进行原料检测，请与精锐检测公司技术人员进一步确认具体事宜。
Preparation sample
Please make sure your test requirements before sending tested samples. Please give an ID for each sample for individual material etc.
1、5g is needed for individual test. Cumulative amount needed for more than one parameter
2、Soluble heavy metals plus pH value tests: 10g
3、Ni release quick check: more than 3 metal articles
4、Please confirm with our customer service specialists when your raw material testing needed.
3、填写检测申请单
Fill in the Application Form
4、送样到实验室
地址：广东省东莞市厚街镇河田大道77号华丰大厦3楼 邮编：523945
Address: 3/F., Hua feng Building, No.77, Hetian Avenue, Houjie Town, Dongguan, Guangdong, China P.C. 523945
收件/ Attention: ：陈振伟 / King Chan
联系电话/ Telephone:：（+86）13602386325
邮箱/Email: Kngchan168@126.com
5、报价及确认
收到样品后本公司会与您联系，确认样品、检测项目及可能的检测周期以及报价。请在收到本公司的报价单后尽快回签确认，汇款并将汇款凭证回传到我司。
confirm quotation
Our Business Department will contact with you as soon as receiving your samples and confirm the sample amount, test requirements, possible turn around time as well as the quotations. Please confirm the test requirements and the quotation with signature or company seal as soon as possible so as to follow the next testing.
6、测试及报告
检测收到汇款凭证后，按照申请，安排相应的测试；如有需要复测，可能要求增加样品的送样量。测试完成后我们会把测试报告发送到您的邮箱，您也可以选择自取或快递给您。
Testing and Repoting
Our technicians will analyse the samples with standard methods or client specified methods. PTS Testing Service Co., Ltd. prefers to send your report with email, or you may select to send the report by express or pick-up the report by yourself.
